Drawings written for the field.
Permit sets that answer the framer’s questions, not only the plan reviewer’s. As-builts, plans, elevations, sections and details, drawn to spec, documented, checked twice. Revisions in days, not weeks.
Drawn
RenderedThe Meridian Residence, Raleigh. The great room as it was drawn and as it was rendered before the permit set. Your crew gets the sheets behind both.
We measure the house before we draw it. The existing conditions sheet is the one the framer checks first.
Floor plans, exterior elevations, roof and foundation plans, dimensioned to the stud.
Wall sections, footing to wall connections, flashing and weather barrier details, drawn where the inspector looks.
Ceiling heights, egress, stair geometry and fire blocking checked against the residential code before the set goes out.
The NC Code and Permit Guide.
Plain language write-ups of the residential code rules that get jobs kicked back, cited to the code. Built for builders and GCs working in Wake, Durham, Orange, Chatham and Johnston counties.
- Ceiling heightsR305
- Safety glazingR308
- Stair geometryR311
- Egress windowsR310
- Fire blockingR302
- Footing to wallR403
- Weather barriersR703
- PermittingCounty by county
A wall assembly from the guide: drywall, the stud bay, sheathing, the taped weather barrier and the siding, in the order they go on.
Four things, priced in writing.
As-builts, floor plans, elevations, sections and details. Built to survive inspectors who read them with a ruler.
Quoted against the scopeLicensed PE review, load calculations and stamped foundation and framing plans, bundled with any design package.
Starting at $2,000 per projectPhotorealistic exteriors and interior walk-throughs for spec homes, listings and client sign-off. Revision rounds included.
$400 to $1,200 per projectInspector comments, field changes and client tweaks handled on the same retainer. A job stops when the drawings do.
On the retainerThree steps from scope to stamp.
- Send us the scope
Hand off the site, the program, the budget and the deadline. Email, call or a Dropbox link. We read it the same day.
- We turn the drawings
Permit-ready drawings in two to four weeks for most projects. The stamped engineering bundle adds five weeks on renovations, seven on custom homes.
- We stay on call
Inspector comments, field changes, client-driven tweaks handled on the same retainer. We know what it costs when the drawings slow the job.
Drawn for a builder’s crew.
Commercial Building Renovation
North Carolina. Existing conditions measured, the renovation set drawn for the partner GC, revisions turned inside the week.
→See all projectsSend us the scope.
Site, program, budget, deadline. We read it the same day and reply within one business day with a fixed fee for the set. Already working with us? Sign in to your portal.